Wilwood Combination
Adjustable Proportioning Valve
       
  Wilwood Combination Adjustable Proportioning Valve  

This valve simplifies mounting, plumbing, wiring and brake proportioning adjustments on vehicles with custom brake systems. The combination block maintains full isolation between front and rear fluid circuits and can be used in conjunction with any tandem outlet or dual mount master cylinder assemblies. The rear circuit has a single inlet and single outlet with the adjustable proportioning valve. The front circuit has a single inlet with two outlets. It can be run as a single outlet with one outlet plugged, or used to split the plumbing on its way to the front calipers.

A fluid port with a pressure switch responds instantly to pressure in the front fluid circuit for brake light activation. A wiring pigtail with a protective boot is included with the switch.

The line connections on the Wilwood combination valve are 3/8-24 with an SAE inverted flare for standard 3/16” (-3) brake line. The supplied tube nuts can be double flared onto any 3/16” brake line. However, if your lines are already flared with 3/8-24 fittings, then the tube nuts are not necessary.

 
Wilwood Combination Adjustable Proportioning Valve Tech
 
Wilwood Combination Adjustable Proportioning Valve
# WIL260-11179
119.99

 

 
Wilwood Logo
   
       
       
       
Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.