VHT Sportsman Camouflage Spray Paint
VHT Sportsman Camouflage Spray Paint
  • Automobiles
  • Motorcycles
  • ATVs
  • Trailers
  • Duck Blinds
  • Equipment Boxes
  • Sports Equipment
  • Deer Stands
  • Decoys


Color Chart

Please call for price and availability
VHT SPORTSMAN CAMOUFLAGE acrylic enamel spray paint is an excellent way to revitalize existing camouflaged surfaces or create new environments. This unique, fast drying, non-glare formulation is weather resistant and is specifically made for outdoor use. The exact match colors are based on military specifications to provide maximum camouflage characteristics. VHT Sportsman Camouflage Spray Paint will adhere to metal, wood, masonry and most plastic surfaces.
Sportsman Camouflage Spray Paint
is available in these colors:


How To Apply:

Clean surface thoroughly; remove all grease, oil, loose paint and rust. Sand previously painted surfaces lightly being sure to feather all rough edges, a 400 grit wet and dry sand paper is best. Wipe part to be painted with tac cloth being careful to remove all dust and paint particles. VHT red oxide primer for iron (Product #SP-303), zinc chromate primer (Product #306) for aluminum or standard primer (Product #301) for wood is recommended for best adhesion and surface preparation. Aluminum and galvanized surfaces should be etched with a metal etch or a 50/50 solution of vinegar and water before priming.

The selection of colors based on military specifications can be combined in an infinite variety of patterns to blend with any terrain. Using the lightest color selected, create a base coat first. Using the second lightest color selected begin to create pattern then use the next darker color until you have completed the desired effect. After the initial base coat has dried the camouflage effect may be enhanced by spraying the subsequent colors on, in the desired pattern, and then dabbing the new color with a sponge before it has dried, usually 3 to 5 minutes. This will let some of the previously painted color show through adding to the camouflage effect. Shake can for one minute after marble is heard. Hold can 12 to 16 inches away from the surface and spray in small oval and irregular patterns. If a second coat is needed repeat the process in the opposite direction immediately. Wait 15 minutes before applying a second coat or selecting a new color. Dries to the touch in 30 minutes and cures completely overnight. When using in temperatures below 70º F or high humidity, dry time will be significantly increased. Parts to be sprayed should be at room temperature for best adhesion, gloss, appearance and durability.

Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.