VHT Engine Enamels
Engine Enamel
  • Engine Blocks
  • Heads
  • Water Pumps
  • Starters
  • Brackets
  • Motorcycle Engines
  • Valve Covers
  • Air Cleaners
  • Differential Covers

 



Please call for price and availability
 
VHT ENGINE ENAMELS are a unique blend of urethane resins, which produce a tough, long lasting heat and solvent resistant finish. VHT has developed Engine Enamel specifically for use on engine blocks, heads, and components. Available in a wide range of factory match colors.
Engine Enamel is available in these colors:

SP-121 UNIVERSAL BRIGHT RED
SP-128 GLOSS YELLOW
SP-124 GLOSS BLACK
SP-130 FLAT BLACK
SP-132 UNIVERSAL GOLD
SP-127 UNIVERSAL ALUMINUM
SP-129 GLOSS WHITE
SP-756 HOT PINK
SP-758 LAVENDER
SP-123 CHEVY ORANGE
SP-133 CHEVY V8 BLUE
SP-135 GM BLUE
SP-139 GM SATIN BLACK
SP-122 PONTIAC BLUE
SP-142 PONTIAC BLUE METALLIC
SP-140 CADILLAC BLUE
SP-120 CHRYSLER HEMI-ORANGE
SP-136 LATE CHRYSLER BLUE
SP-126 EARLY CHRYSLER BLUE
SP-134 FORD LIGHT BLUE
SP-125 FORD DARK BLUE
SP-131 FORD GREEN
SP-137 FORD GRAY
SP-138 NEW FORD BLUE

How To Apply:

Clean surface thoroughly. Remove grease, oil, loose paint, rust, etc. Sand previously painted surfaces lightly, being sure to feather all rough edges. Clean with a high-grade cleaner that leaves no residue, such as VHT's Brake Cleaner (Product #SP-11). Allow to dry before applying coating. Shake can for one minute after marble is heard. Hold can upright 12 to 16 inches from surface during application. Apply each coat in a crosshatch pattern. For best results, apply thin, even coats in 20-minute intervals until desired coverage is achieved.

Curing:

VHT Engine Enamels will air dry in 15 to 30 minutes. Baking at 200° F for half an hour (a Bar-B-Que works great!) improves finish and provides a durable surface for solvent resistance. The inherent heat of operation may also accomplish curing. Until coating is cured, finish is not solvent resistant.

Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.