VHT Nu-Cast Engine Enamels
Nu-Cast Engine Paint
  • Engine Blocks
  • Heads
  • Valve Covers
  • Water Pumps
  • Intake Manifolds
  • Rear End Housings
  • Alternators
  • Starters
  • Differential Covers

 



Please call for price and availability
 
VHT NU-CAST ENGINE ENAMELS are specifically formulated to duplicate the original color of newly cast metals in order to restore OEM parts to their Nu-Cast appearance.Capable of withstanding temperatures of up to 500° F and is extremely resistant to chemicals, salt, corrosion and rust.
Nu-Cast Engine Enamel is available
in these colors:

SP-995 500° Aluminum Engine Coating
SP-997 500° Cast Iron Engine Coating

How To Apply:

Clean surface thoroughly. Remove grease, oil, loose paint, rust, etc. Sand previously painted surfaces lightly, being sure to feather all rough edges. Clean with a high-grade cleaner that leaves no residue, such as VHT's Brake Cleaner (Product #SP-11). Allow to dry before applying coating. Shake can for one minute after marble is heard. Hold can upright 12 to 16 inches from surface during application. Apply each coat in a crosshatch pattern. For best results, apply thin, even coats in 20-minute intervals until desired coverage is achieved.

Curing:

VHT Engine Enamels will air dry in 15 to 30 minutes. Baking at 200° F for half an hour (a Bar-B-Que works great!) improves finish and provides a durable surface for solvent resistance. The inherent heat of operation may also accomplish curing. Until coating is cured, finish is not solvent resistant.

Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.