VHT Wrinkle Plus Coating
Wrinkle Plus Coating
  • Valve Covers
  • Injector Plenums
  • Metal Dashes
  • Glove Boxes
  • Starters
  • Alternators
  • Fire Walls
  • Shifters
  • Door Panels

 



Please call for price and availability
 
VHT WRINKLE PLUS COATING is formulated and designed to provide a textured finish, while withstanding temperatures up to 350°F. This is the ideal product for under the hood, personal styling of valve covers, air intake housings, fire walls, and fender wells. VHT Wrinkle Plus resists color fading, grease, degreasers, rust chipping, cracking and severe weather conditions.
Wrinkle Plus is available in these colors:

SP-201 Black Wrinkle
SP-205 Gray Wrinkle

How To Apply:

Clean surface thoroughly. Remove grease, oil, loose paint, rust, etc. Sand previously painted surfaces lightly, being sure to feather all rough edges. Clean with a high-grade cleaner that leaves no residue, such as VHT's Brake Cleaner (Product # SP-11). Allow to dry before applying coating. Shake for one minute after marble is heard. Use at room temperature, holding can upright 8-10 inches from surface, apply a heavy base coat in crosshatch pattern. Repeat this process until the desired coverage is achieved. Avoid runs caused by excessive spray. Wrinkle pattern will appear 20 minutes to twelve hours after the final application, depending on temperature and light. Process may be accelerated by the use of a heat source (heat gun or hair dryer) in an oscillating motion. Process may also be accelerated by exposure to light. The level of heat and light exposure determines the coarseness of the finish. Once desired coarseness of finish is achieved, remove heat and light sources from subject being coated until cured. Coating is fully cured after 48 hours.

Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.